look what i found

[monkeykiller1996]

well i got it apart and this is what i found there is nothing left of the back bearing at all

[monkeykiller1996]

well i got everything put back together i stopped by the jy to get a couple things (first pic) after all that i gave it a quick bare minimum tuneup(plugs, rotor button ,valve cover gasket). i noticed some wires sparking down by the diff of the trans and after moving them now the car wont crank with the key i can bridge the starter and it will start, so its something between the key switch and starter




got the old races knocked out



took the rotor off



brass punches are a godsend



whats left of the old bearings





got the hub cleaned u a bit and all back together now lets hope the bearing last



for the eagle eyed if you look at the last picture you can see i forgot to put the rotor back on opps!!

[fastivaca]

I hope you had a bearing spacer in there. I didn't see one in the photos.

[monkeykiller1996]

yep i had the bearing spacer i just forgot to take a photo of it :tm:

[Movin]

Was the preload still good? Some of that looked pretty rough.

[monkeykiller1996]

surprisingly enough it was, im just going to get a new knuckle or aspire swap if you look at the bottom middle of the pic you can see it