Car pulling to right (updated with fix and pics)

[wrestler3025]

TRW Stabilizer Bar Bushing

Part Number: HB1749K

here's the info you need, just incase you get a mentally challenged parts counter person.

[GenevaDirt]

Well...after a fun time driving around to find the right bushings....Advanced auto was supposed to get me the ones above...but when I got there after work...they shipped the wrong ones...transposed the last 2 numbers, IDIOTS! I finally found them though and fixed the passenger side tonight. I will be raplacing the drivers side another day but sometime soon....they are getting cracked and such. Here are some pics...but they are reverse order...thats my son in the pic helping and learning. These bushings went in the easiest I have ever done. I was able to put them on and get the bolt started no problem at all...no triming or fighting...right on. And made in USA too.











A greasy mess from a previous oil pan leak...lol

[Pu241]

Uh, I never took the control arm bolt out or the pinch bolt/nut!
I just unbolted the control arm to ant-sway bar nut and took off the
passenger side front sway bar mount, if I was doing the pass. side
(diver side if replacing driver side).
Doesn't matter, just so long as you got it taken care of!
Nice pics too! 8)

[GenevaDirt]

Yeah...I also wanted to make sure my axle was in all the way...looks like I might need a new tranny seal on the passenger side. Plus the pinch bolt came out like butter...path of least resistance....then it opened up the whole area so I could just work on it from the side ..like I was changing a tire.