Announcement

Collapse
No announcement yet.

fuel cutout?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fuel cutout?

    when i try to start my 93 escort gt. it cranks over fine but the (fuel cutout light) comes on. do i have to prime the fuel rail or somthing. i rember on monster garage and when my mom got in a fender bender the fuel cut of switch in the trunk triped and the car dident run. but i dont want to press it unless i know that is the problem. also is there any other things that mite be wrong? any ideas?

    thanks mike 8)


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

  • #2
    need a answer asap. please help my baby run


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment


    • #3
      You can press it anyway. It won't hurt anything.
      Brian
      http://www.cardomain.com/ride/2274977



      93 GL modyfied!!!
      :fish:

      Comment


      • #4
        Yeah just press it. It'll fix it or it won't, but it won't make it worse. I'm guessing that it will fix your problem since that light came on.

        Comment


        • #5
          i pressed it and that did not fix it. i feel kinda stupid about this but i think i put my timing on wrong so... ill go check that then try some other stuff too, then we will see if my baby runs!!!!!!!!!!!! wish me luck. As arnold says "I'LL BE BACK"


          Mike, AKA the sasquatch
          1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

          Comment


          • #6
            Good luck!
            Brian
            http://www.cardomain.com/ride/2274977



            93 GL modyfied!!!
            :fish:

            Comment


            • #7
              i made it better it is SOOOO close to runing but as soon as it starts and i lay of the starter it dies. im gona test the compression to day and hopfully it will run and if it dosent there will be hell to pay. 25horseplay thanks ill need it


              Mike, AKA the sasquatch
              1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

              Comment

              Working...
              X