Tweet
i am in the middle of honing my 93 egt and it says to use honing oil and i dont have that so can you use regular motor oil? (10w30) please respond as fast as possable!!! time is money!!! lol :lol:
-
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol... -
i'd use PB Blaster myself, the key to cutting oil is it has to be thin and resist heat fairly well, so anything that fits that description will work.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
-
thanks im going to do that now
Mike, AKA the sasquatch
1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...Comment
-
WD40....kerosene...30W-ND...Dextron...water...salad dressing...will all work well.
The 'lube' can be anything...it's purpose...to keep the stones from getting clogged.Joe Lutz
The SKATE ..... 1992L 5spd
The Greatest Purchase I Ever MadeComment
Comment