Tweet
Ive been working on by B6 head. Anyone know any good ways to remove varnish? Ive tried solvent (the parts wash stuff), acetone, brake cleaner but nothing works! The head is nice and golden but i wanted to clean it out so its nice and shiny.
-
89SX funtop! Fully loaded!
RIP 90LX
-
Ozzy Juice if you can find it, and it has to be warm for it to be most effective.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
-
Carb cleaner worked on mineit runs so sweet
91 L 5spdComment
-
Re: Claeaning off varnish
the non enviromental stuff is okOriginally posted by stefan
BetterOriginally posted by kzbill
Most shops use a product called "Aluminum Brite" Grainger sells it....don't know if they're in your area.....this stuff very similar to condensor coil cleaner....which is similar to lye (sodium hydroxide) which is similar to paint stripper. Paint stripper will work well...make sure you get a good rinse on it.Joe Lutz
The SKATE ..... 1992L 5spd
The Greatest Purchase I Ever MadeComment
Comment