Tweet
Hey folks, got some whirring out back so took off the drums to inspect the wheel bearings and spindles...both sides are completely wasted. I haven't pulled the fronts apart yet, but based on the age of the grease out back, my guess is it will be a mess too.
While under the car, I noticed there was oil seeping from the steering rack boot and one of them is cracked.
There is all sorts of stuff about using Aspire parts out back and Rio parts up front, but even that stuff is getting hard to come by.
Are there better options nowadays to the rotating bits? Thanks!
While under the car, I noticed there was oil seeping from the steering rack boot and one of them is cracked.
There is all sorts of stuff about using Aspire parts out back and Rio parts up front, but even that stuff is getting hard to come by.
Are there better options nowadays to the rotating bits? Thanks!