Announcement

Collapse
No announcement yet.

BP dipstick help.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • BP dipstick help.

    my BP came without a dipstick, i am buying a universal adjustable chrome one tomorrow, but i need the measurement of how long it to to set the new one to the correct length to get an acurate reading, who can do me this favor and measure their dipstick for me? from the point that rests on the top of the dipstick tube to the tip.



    i know.... very haggard drawing. thank you.
    blue flake 89L shaved hatch, Lowered, BP swap in progress, bobtail bumper, 5spd tranny, acura 5 spoke 15" wheels and fiberglass dash

  • #2
    from the rubber stop thing to the bottom of the stick is 12 3/8 inches or 32 cm. and the full line is 10 1/2 inches or 27.5 cm.


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment


    • #3
      im not quite sure on what points you measured to and from. i need it from the part that its at the top of the dipstick tube to the stick, JUST thae part that is in the tube while it is in the engine. no less and no more. thank you.
      blue flake 89L shaved hatch, Lowered, BP swap in progress, bobtail bumper, 5spd tranny, acura 5 spoke 15" wheels and fiberglass dash

      Comment


      • #4
        Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today!


        Store your photos and videos online with secure storage from Photobucket. Available on iOS, Android and desktop. Securely backup your memories and sign up today!


        Mike, AKA the sasquatch
        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

        Comment

        Working...
        X