I need help ASAP!

[Unicornasaurus]

I lost my Brake Master Cylinder Resevoir cap, and the guy at Lordco said that they don't even list one for a Festiva. Is there any other type of car's cap that I can use? 323/626/etc.?

Thanks!!

[Festiva GTX]

I lost my Brake Master Cylinder Resevoir cap, and the guy at Lordco said that they don't even list one for a Festiva. Is there any other type of car's cap that I can use? 323/626/etc.?

Thanks!!

Ford Aspire 94' to 97' will match same cap with Ford Festiva.

[Gforcefd]

Check a 90-94 Mazda protege, or a Ford Aspire, they both should work I believe. I know you can take the whole plastic part from a protege and put it on the master cylinder, but it has an extra hose for the transmission cylinder.

Logan (HOPE THIS HELPS)

[Unicornasaurus]

Dangit. None of the part's stores around here carry them. Guess it's the junkyards next on my phone list.

[jglutz]

bone-yard part.

[stefan]

if you cant find the cap almost all the mazda resivoirs fit on the festiva MC. I have a rectangular 323 one on mine.

[Unicornasaurus]

Well I was lucky enough to get an Aspire cap. It fit perfectly!! Thanks GTX!

I also got the actual Brake Master Cylinder itself, since mine is leaking. Unfortunately, one of the brake lines is located on the top(facing up) of the BMS on the Aspire, and my festiva one is located on the side, pointing towards the passenger side.

Is there any way around this? I don't really want to bend the lines since they could break, and well that wouldn't be fun at all.

Can I use one of the brake lines from the Aspire?

[SimonTuffGuy]

I think you can just bend them. That's what I did when I used the Aspire MC...