Haynes Repair Manual

[Accel]

Does anybody know where to download Haynes Repair Manual for Ford Festiva 1.3 '88 carburated?
I've bought one and it's not working properly

Please help, you're my only hope!

[batstiva]

Don't know that you can download the manual. Is there something specific you need to know from there for right now? If not, they are at Autozone around here all the time.

[BigWheel]

I bought mine at Advance Auto and have also seen them at O'Reilly's. Haven't seen one online before.

[Accel]

Here is mine Haynes Mazda 323 '88 owners repair manual

This mazda is a little bit similar to mazda 121 DA (ford festiva, kia pride...)

[WmWatt]

You bought a Haynes manual and it's not working properly?
Mine works okay, no problems so far.

Mr. Haynes would not like it if people put his manuals online.
Something to do with copyright. You can buy one at an auto parts store for about $25, and sometimes find them at second hand book stores.

[Accel]

You're lucky with that.
I've bought reprir manual again but "There was an error opening this document. The file is damaged and could not be repaired" problem remains... Tried to open it with the latest version of Acrobat reader...
Here it is(on my ftp) - ftp://89.209.87.37/Haynes Ford Festi...air manual.pdf
Maybe you can open it...

>>Mr. Haynes would not like it if people put his manuals online.
I dont like to spend money twice and get corrupted manual

Please help me with manual.

P.S. my problem is how to connect AISAN carburator to all that electric things...

[batstiva]

Areyou trying to figure out electrical connections, or vacuum hose connections?? Didn't remember there being that many electrical connections to be made. 1 round connector, and 2 flat ones. Now, the hose connections are a bit of a nightmare. Downloading the manual now, will let you know if I can open it.

[Accel]

Can't find round connector and I have only one flat with 6 holes...
Hose connectors are not connected at all
Thanks.

[Accel]

The second one I bought, "Haynes Mazda 323 88 owners repair manual 81- 89.pdf"(it is also available on ftp) works fine, but there is no info about all this stuff...

[WmWatt]

I didn't know Haynes manuals were avialable for purchase online. Adobe acrobat readers
can be downloaded for free.

There have been vacuum hose diagrams in earlier threads in this forum.
I'd try the search feature. The Haynes manual doesn't cover them.
It does have wiring diagrams at then end of the manual with the
colour coding of the wires noted.

[batstiva]

Okay, had no luck trying to copy the link over here, but if you search 'vacuum hose diagram' it will take you to a thread with several diagrams pictured. Not sure on the electrical connections, and bear with me I'm doing this from memory, but mine had a four wire set going through a round connector, a two wire set going through a flat connector, and a single wire that connected to the alternator. I am assuming that you are talking about the wiring directly connected to replacing the carb. If I am assuming wrong, then please disregard.

[batstiva]

So, have you gotten it all back together? Just kind of wondering what the status was. BTW, I updated my Adobe, and still had no luck opening the haynes. Think I'd just head to a parts store and pick one up.

[pwgus]

I've created a PDF service manual based upon the eautorepair.net manual, complete with wiring diagrams, and everything in full resolution. Its almost 10mb. Available on my website at www.bntbtc.com/festiva/festivasm.pdf

[pwgus]

oh yea, and also, the wiring diagrams and some other stuff are available in that folder individually from the pdf in the origianl gif format (thats right, no downsizing, all of it is in the original high resolution from the website from which I bought it!), to browse the directory, you can go here

[ejp2fast]

thanks again pwgus!!!!!!