Tweet
i've heard it referred as both. I always call it a tuning fork, but what do i know, im an old man.
-
Thom-Lifes too short, don't blink
93 Festiva (Little Red Truck)
01 F-150 (Big Red Truck)
-
Heh heh... me too --------------------------------------------------------------^^^^^^^^^Originally posted by milehighbear View Post
Focustiva: Because I was told it was was impossible to fit a Focus bumper on a Festiva.
In memory of Dean Allen - V8 Festiva 1955-2010Comment
-
You can rent tools at Autozone..
Comment
-
^^ for free...Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
wat? damn i need to find one cause im stuck on my ball joint arm. cant get it off the frameComment
-
Is it the ball joint stuck on the hub arm? If so with the pinch bolt out take a BIG hammer and hit the part of the hub arm around the ball joint hard, really hard. This will shock the part loose, this really does work.Comment
-
its stuck on the strut cause the strut runs into the ball armComment
-
dude, we need PICS!!! point at the issue and we can solve it. i've reread the whole post and still can't picture in my head what your having trouble with. one pic could solve all your problems.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
Just trying to think thru this whole process once more... you did completely remove the anti-sway bar from the lower control arms & frame mounts up front, right? As Brian pointed out, with the hub/rotor assembly still bolted to the shock/spring, and everything else out of the way, you should be able to get in with a hammer and pop the top of the ball joint stud & it "should" drop out the bottom. I also agree that a photo would greatly help identify the issue(s)!
Focustiva: Because I was told it was was impossible to fit a Focus bumper on a Festiva.
In memory of Dean Allen - V8 Festiva 1955-2010Comment
-
sry no photo phone got shut off and no camera but yes did hit and no it no come off... taht and tranny seal for axle shaftComment
-
welll gotem off thx for the help guys now om on downyet again thx for the help everyonetime for partsComment
-
PB Blaster soaking FTW
it's awesome stuff...Have had 6 Festys... and counting...
My Website:
http://www.StanfordMotorSports.com
Car Domain:
http://www.cardomain.com/id/Quaddawg
My Garage Page:
http://www.fordfestiva.com/forums/vb...o=view&id=6724Comment
-
AeroKroil is better...Originally posted by quaddawg View Post
Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson)Comment
-
Hey Jim,
Where do you purchase AeroKroil?ENFORCER - Midwest Festiva Inc., Iowa
#1 '90 Sport to modified Lx - RollazX
#2 .....Cheesehead
#3 '91 White - Donor Car
#4 .....Montana Project
SOLD----Levistiva for $1500
Bought her back for $450
Now that's darn near priceless!!Comment
-
I buy it at a local parts place, but Eastwood carries it also.
here's the gallon size;
Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson)Comment
Comment