Spindle/hub assemble freeplay

[Jasin]

I took off a couple of spindle assemblies and there is about 1/8 inch of play on em. Supposedly the wheel bearings were replaced on this recently so I assume the guy didn't press them back on right. Not much I can do about it eh? Other than take them apart, check and repress? Pretty much just talking to myself here I guess....

[WmWatt]

Or take them back to the place where the bearings were replaced recently and ask them to fix it, if you can find out where that was?

[Jasin]

From 93 festiva93 on here, I bought a car and some stuff from him: Never would have if I knew....

[Jasin]

make that 93 FordFestiva93

[Pu241]

Just a note: You can edit your own posts if a correction is needed

when did you purchase the items?
We have iTrader rankings(see your own under your post count) and 93 FordFestiva93 ranking is as low as I've seen, -2.
That might have been a warning depending upon when you bought those items.

[Jasin]

[FS]BP powered 4speed 90L Plus. $1,000(and other stuff)

I purchased this from him on 4-16-08 for $700 from Conklin, NY

I did not see the i-trader thing for him at that point in time or I woulda put a stop to it.

I got the car and it was a mess and a buncha the items didn't show with it; I called and left a message with him but no return call of course. It was my own fault for being to trusting and biting at the bit: I wanted a BP car fast and had too much money laying around(Not having that problem now, let me tell ya).

[MONSOON]

Hell you might as well hang it up. He wont respond to anything. He ripped me off for $50.00 around that some time. And delivered NOTHING but excuses. Then tried to turn it around on me and accuse me off ripping him off. Im one of the ones that gave him a negative iTrader rating. Im hoping to see him face to face someday. If it makes you feel any better you can do a search for the car he bought with our money. He posted pics of it here. And comes in now and again to lurk.