Announcement

Collapse
No announcement yet.

(1992-93) Festiva wiring diagrams

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • (1992-93) Festiva wiring diagrams

    this is diagram 23-1
    Last edited by mechanicaldj; 06-12-2009, 07:39 AM.



    I am the original

  • #2
    diagram 23-2
    Last edited by mechanicaldj; 02-24-2009, 08:57 PM.



    I am the original

    Comment


    • #3
      diagram 23-3



      I am the original

      Comment


      • #4
        diagram 23-4



        I am the original

        Comment


        • #5
          these diagrams are from a 92 Festiva FI

          they should be used as a reference for earier FI models as for wire colors could have changed

          this thread is closed due to more diagrams are to follow



          I am the original

          Comment


          • #6
            the charging system 92 Festiva FI:






            How The Circuit Works


            The Battery and Alternator/Regulator make up the charging system. When the Ignition Switch is in the RUN position, current flows from the Battery through the 25-amp MAIN Fuse Link, the Ignition Switch, and 15-amp HEAD Fuse Link through the Alternator/Regulator to ground.

            While the Alternator Rotor is turning, with current in the Alternator Field Coil, the Alternator produces an alternating-current voltage which is rectified to a direct-current voltage to operate the electrical systems and charge the Battery.

            The Regulator, which is integrated with the Alternator, controls the charging voltage to approximately 14 volts.

            The Charge Warning Indicator is connected across the terminals of a 100 ohm resistor at the Instrument Cluster. For the 1.3L EFI system, current passes through the warning lamp when the Ignition Switch is in the RUN position and there is no voltage at Terminal "S" of the Regulator. When the voltage at Terminal "S" rises above a preset value, the Regulator switching circuits stop the flow of current into Terminal "I" of the Regulator and the lamp turns off.

            A Fuse Link is included in the charging system wiring on all models. The Fuse Link is used to prevent damage to the wiring harness and Alternator if the wiring harness shorts to ground, or a booster batter with the wrong polarity is connected to the charging system.



            I am the original

            Comment


            • #7
              the fuse panel and related 92 Festiva FI:



              Last edited by mechanicaldj; 02-27-2009, 08:28 AM.



              I am the original

              Comment


              • #8
                timing specs

                1992 timing specs for:

                1.3L
                1.8L
                2.2L






                Last edited by mechanicaldj; 02-27-2009, 08:27 AM.



                I am the original

                Comment


                • #9







                  Last edited by mechanicaldj; 04-21-2009, 11:00 PM.



                  I am the original

                  Comment

                  Working...
                  X