Problems setting the timming right

[FFW]

Well its coming along and have came across many problems, but great support from FF members and a friend Mario helping me with putting new head.

old B3


B6 from festivaWES




Now hit another snag or dont know if it is normal. Set cam pulley on its correct position but i am having problem with bottom one.(do have car in neutral) It will move a bit but will hit a point were it wont budge no more. Mario suggest setup everything and to just crank it a lil but not all the way, then try to setup timing.



Thanks in advance!

[JoDan]

Take the timing belt off and put the crank bolt in and turn it until its aligned with the mark

[FFW]

Take the timing belt off and put the crank bolt in and turn it until its aligned with the mark

doh i totally forgot about that! will do that today, thanks!!