Tweet
What sould i tighten the head bolts on a 89 festiva to?
-
-
according to Haynes, 35 to 40, then 56 to 601992 Subaru Legacy
1988 Chevy Caprice Classic -
sounds about right. remember to do the criss-cross tightening sequence.Originally posted by garylau View Post
-"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
-Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
-Aspire brake swap COMPLETE!
https://www.wunderground.com/persona...?ID=KOKOWASS38Comment
-
that would be ft-lbs, not N-M.
I suspect he may not be in the US, and is using the metric system for torque values.Jim DeAngelis
kittens give Morbo gas!!
Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
Performance Red 94 Aspire SE (Stimpson)Comment
-
Per the factory shop manual:
Step 1 - 50 to 60 N-M (35-40 lb-ft)
Step 2 - 75 to 81 N-M (56-60 lb-ft)
Torque sequence:
10 6 2 3 7
O O O O O
O O O O O
9 5 1 4 81988 L - aka: Underdog
1990 L - soon to be trailer
1994 Aspire (Looks like an egg)Comment
-
Thank you for help.Comment
Comment