I need a driver side exterior door handle for a 88 festiva L and how do I put it on?
Announcement
Collapse
No announcement yet.
door handle
Collapse
X
-
very carefully
Just kidding. You must:
1. remove the retaining clip holding on the window crank
2. remove the window crank
3. remove the inner door handle
4. remove the hidden screw at the bottom of the map pocket
5. carefully remove the door panel, preferably with a trim removal tool
6. peel back the vapour barrier far enough away from the handle location so that you gain access
7. remove clips holding steel rods to the door handle
8. remove two nuts holding the exterior door handle
Good luck!Last edited by bravekozak; 12-25-2009, 01:48 PM.
Comment