Announcement

Collapse
No announcement yet.

Rear windshield wiper installation

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rear windshield wiper installation

    Hi, I drive a 93 Festiva which came from the factory without a rear windshield wiper. I see a place for a fuse to go, and I have a parts car equipped with a rear wiper. I was wondering if anyone has ever installed a rear wiper, and what exactly needs to be done (ie: wiring, holes cut, etc.) Any help would be great, thanks.

    Alex

  • #2
    Just take the parts car apart and see. I'm sure you'll need to drill a hole for the wiper/motor drive. Not sure about the wiring, did all cars come ready for this?

    matt

    BP Festiva http://www.cardomain.com/ride/723319 - SOLD
    BPT Festiva www.cardomain.com/ride/2260009 - SOLD
    BPT GTX www.cardomain.com/ride/2436495 - SOLD
    New GTX - http://www.cardomain.com/ride/3294846/ - SOLD

    Comment


    • #3
      The job would be much easier if you just swapped the complete hatch. You would still have to install the washer reservoir, filler pipe, hose and pump but you wouldn't have to drill any holes.
      Ian
      Calgary AB, Canada
      93 L B6T: June 2016 FOTM
      59 Austin Healey "Bugeye" Sprite

      "It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)

      Link to the "Road Trip Starting Points" page of my Econobox Café blog

      Comment

      Working...
      X