Announcement

Collapse
No announcement yet.

Crank Pulley.... What other makes use the same

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Crank Pulley.... What other makes use the same

    I have a 88 Ford Festy LX 1.3 Ltr. w/carb.
    What other makes of small cars have or use
    the same pulley?


    thanks

    Jokoza57
    "For God so loved the world that he gave his
    only begotten son, that whosoever believes in
    him should not parish, but have everlasting life."

  • #2
    festiva/aspire
    05 focus zx3 5spd 180k 2.5 inch mbrp exhaust , steeda sri and ford racing dynamic suspension

    Comment


    • #3
      '88-92 Festiva and I believe '88-89 Mazda 323.
      '90 LX

      Comment


      • #4
        Aspires have a serpentine portion that has to be cut off. Do you need a stock one? I have a few if you need.
        -Greg
        Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
        BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
        Redneck Engineer
        FOTY - '09
        5x Festiva Madness Attendee...FM 3,4,5,6,8
        http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
        http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

        Comment


        • #5
          2002 KIA rios share the same pulley too, they just weigh a little more.

          I can't speak for 00/01's but I would think all 1st gen rios would work.

          I've got a Rio pulley if you want it.

          Large nose BP pulleys fit on the crank but they are v belt pulleys
          Last edited by zoom zoom; 03-02-2012, 07:09 PM.
          2008 Kia Rio- new beater
          1987 F-150- revived and CLEAN!!!
          1987 Suzuki Dual Sport- fun beater bike
          1993 Festiva- Fiona, DD
          1997 Aspire- Peaspire, Refurb'd, sold
          1997 Aspire- Babyspire, DD
          1994 Aspire - Project Kiazord
          1994 Aspire- Crustyspire, RIP



          "If it moves, grease it, if it don't, paint it, and if it ain't broke don't fix it!"

          Comment


          • #6
            How is this General Discussion related?!
            Simon - pimptiva.com

            Comment


            • #7
              If the '88 has the stock engine, it is going to have the small nose crankshaft and only the partial year '92 and older Mazda engine pulleys will fit.
              You gonna race that thing?
              http://www.sdfcomputers.com/Festivaracing.htm

              Comment

              Working...
              X