Announcement

Collapse
No announcement yet.

e brake mount

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    e brake mount

    Hello All,

    I was replacing the fuel tank in my LX last night and all was fine until I went to connect the ebrake cable mount to the fuel tank... seems I must have over tightened it or something and I broke the stud off, :cwm21: seeing as there is nothing wrong with the rest of the cable I'm wondering if it'd be as easy a fix as drilling a hole into the top of the bracket and putting a bolt and nut in place of the stud. I'm trying to get it back on the road as soon as possible. I was hoping to have it ready by FMIV but for financial reasons I won't make it this year (figures) Any input would be helpful
    Andrew Walker

    Current Daily Driver:
    89 Nissan D21 SE V6 5 speed 4x4
    Projects in the works:
    84 Mercedes Benz 300D(T)(Baby) currently awaiting transmission transplant/ full on restoration
    Tags: None
  • #2
    Sure, just drill it out and use a bolt, nut and lock washer. Shouldn't have any problems, I've done the same thing before myself!
    No festiva for me ATM...

    Comment

    • #3
      Mine has been held in place for years by twisted wire.
      Original owner of silver grey carburetted 1989 Festiva. 105k km as of June 2006. 140k km as of June 2021.

      Comment

      Previous template Next
      Working...
      X