Tweet
Before I have to go to parts store and play what size is it can anyone tell me what size the small hose is? Also does the coolant flow towards front of the engine.. working on a project.
-
91 rusty Festiva 260k -
I did that job on that U shaped coolant hose last summer. I believe it is 5/16. I used a fuel hose. Also get that shaping spring with a little rod to make it "U" shaped if it's that one you're replacingJ-S
'93L "Pepestiva" - 160 miles old Road Slave -
or insert a small section of brake line curved in the appropriate shape.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
Actually the hose I replace it with will be longer with a filter in the middle. So not to worried about the shape. Funny how they have 5/16 and 3/8 why not just stick with one?91 rusty Festiva 260kComment
-
what i did to prevent that hard U shape, is to loop it up and around like a pig tail... (or like the breast cancer ribbon symbol, sorta)
-"Hairlipstiva" 1991 GL 5spd (swapped from an auto), rolling on Enkei 14x6 +38 with 195/45/14 Toyo's, Jensen MP5720 CD deck, tach install, LED strip in cluster, down position rear wiper, FMS springs, Gabriel shocks on 4 corners, Acura Integra short shifter
-Escort GT 91 donor car with BP, G5M-R tranny to be dropped in the little guy...
-Aspire brake swap COMPLETE!
https://www.wunderground.com/persona...?ID=KOKOWASS38Comment
Comment