Tweet
My license lamps are melted into the housings so I need to replace the whole thing. I've tried everywhere online and the only thing I could find was a part on ebay Germany and I don't speak German. I have been searching junkyards and can't get the rusted screws out so I looked around and found an Aspire. I got the lights out with the connectors attached but they aren't the same connectors. So, my question is, can I just take out the wires from the connectors and switch them into my Festiva's light connector assuming I connect them up correctly?
aspire lights:
festiva lights:
aspire lights:
festiva lights:
Comment