Tweet
Ive got an auto but I bet that would work the same, I tried putting it in neutral today on the way home and it didnt make a difference so I will replace the trans mount ( I know its bad...it has no rubber left
)
)
-
-
Front wheel bearings .....New build on the way .Comment
-
I hope not but im kindof leaning that way.Comment
-
Okay..... I replaced both the inner and outer tie rod ends and it worked, well mostly there is still some vibrations but nothing like it was. When I had someone turn the steering wheel the tie rods didnt move like they were bad but when I took them off I could move them without trying.Last edited by Tommy; 02-06-2012, 04:57 PM.Comment
-
Mine shakes like that if the tires are low.. 30PSI = shake. 40PSI = no shake.
I'm running 165 70R12 tires.
It's crazy how much of a difference that makes for me! You'd think it'd be the other way around!Comment
-
My lower ball joints were tight but the shimmy
went away with new LCR's. They had some play
while on the alignment rack, No play on the hoist.Reflex paint by Langeman...Lifted...Tow Rig
Comment
Comment