Tweet
hello all, i have swapped a carb to efi, and did another straight swap, but never a 96 aspire 1.3 to my 93 festy. are there any differences i need to look for? i was planning on using the festiva intake just incase, but my main question was the aspire engine is connected to a auto tranny, my festy is a standard, is that gonna cause any problems? just thought i would ask the experts before i bought this low mileage aspire engine for 150$
-
93 L plus 5 speed, custom herculined paint job, custom billet grille
-
you need the intake, exhaust, flywheel, crank pully, temp sensor (in the head) and distributor off the festy engine.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
-
A little bit of searching would have answered the question but here is a link to an article on the subject:
You don't "need" the festiva exhaust or crank pulley, but these item are specifically addressed in the article.The Festiva Store
Specializing in restoration, tuning and custom parts.Comment
-
thx alot guys that helps a lot.93 L plus 5 speed, custom herculined paint job, custom billet grille
Comment
Comment