Announcement

Collapse
No announcement yet.

help b6t with no spark

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help b6t with no spark

    I pulled the b6t out of my festiva to put a Waterpump timing belt clean it up and paint it.
    After that I put it back in the festiva and hooked everything back up and roll it over and that it.
    No spark at the wire or the coil so I got a new coil and still nothin.
    I have power at the coil plug but ain't getting anything past the coil.

    I remember someone on here having the same kinda prob and it was a ling thread but can't seem to find it.
    Lookin fir anyideas u guys may have I am missing all the Autox Days lol
    Last edited by mikeycar500; 06-04-2012, 11:03 PM.
    the heart beat of america stops here______________/\
    \/\_____________FORD
    FOREVER

  • #2
    Distributor ?
    -M3NTAL MARK! Woo!!

    Comment


    • #3
      For me it was a ground.
      91 Festiva BP Autocross/Track/Rallycross hopeful
      14 C7 Z51

      Comment


      • #4
        +2 on the ground, the one from the main harness to the t-stat housing. On the Capri - if it's not connected, you won't get spark. It grounds something inside the distributor
        Last edited by Rocketman; 06-05-2012, 04:51 AM. Reason: accidently a sentence
        1991 Mercury Capri XR2 "GTXR2" BPT Swapped AWD Conversion

        Rocketchips!
        High Flow B3/B6/BP VAF Adapters for sale!
        Bolt-on Weber Carb Adapters!

        Comment


        • #5
          Ok thanks I'll have to go over and check all my grounds
          the heart beat of america stops here______________/\
          \/\_____________FORD
          FOREVER

          Comment

          Working...
          X