DRLs

[hodginsa]

I've seen a couple threads on putting daytime running lights into festys. I can easily just rig something up when I go back to canada to get a safety, but if I could use stock festy stuff that would be way better/easier.

Does anyone know if the stock DRL plug was left in the US festy? I mean they seem to have just put everything in all of them.. There are a bunch of plugs by the driver side firewall, none of which are plugged in, could one be the DRL plug? Its a 1990.

Anyone have a pic of the actual male/female connector?

[Damkid]

I'd be willing to bet all the DRL wiring is in all festiva's, just need the relays and module

[zoom zoom]

My aspire was missing the drl resistor socket on the firewall that's supposed to be between the A/C relay and solenoids/brake fluid lvl switch, and the wires/sockets were missing for it behind the ecu where the relay is. It did have wires ran for the fog lights tho, just no relay or fuse...or switch.

[DriverOne]

What if you used a sensor like GM has that knows when it's daytime, and just run the lights off the accessory switch?

[hodginsa]

Ill do some investigating tomorrow. But I would do something like that for fun, but the DRLs are just so I can safety the car in Ontario in august and import it.

The less wire splicing I have to do in the festy the better.

[hodginsa]

So i have several empty plugs on the driver side firewall, 2 - 1 prong, 2 - 2 prong, and a 6 - prong with only 3 wires inside the plug. Hopefully one is DRL plug, anyone have a pic yet? haha

[fastivaca]

So i have several empty plugs on the driver side firewall, 2 - 1 prong, 2 - 2 prong, and a 6 - prong with only 3 wires inside the plug. Hopefully one is DRL plug, anyone have a pic yet? haha

I'll check mine a little later.

Sent from my SGH-I727R using Tapatalk 2