Announcement

Collapse
No announcement yet.

Inner tie rod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Inner tie rod

    Is the inner tie rod the same for all models of Festiva? I bought a set off ebay with control arms, inner/outer tie rods but the threads on the inners don't match up with the rack, the new outers fit the old inners. All the listings for inner tie rod on ebay either say all models or 90-93. Thanks!

  • #2
    i'd send them back and get them from autozone their parts come with a warranty and the inners are 24bucks a piece

    Comment


    • #3
      Some inner tie rods had course threads on the rack side and some fine threads. The early models usually had the course threads.
      1960 willys pickup
      1967 jeep cj5

      1988 festiva
      1989 festiva
      1990 festiva for parts
      1991 s-10

      "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote!" —Benjamin Franklin, 1759

      Comment


      • #4
        Originally posted by worfdog View Post
        Some inner tie rods had course threads on the rack side and some fine threads. The early models usually had the course threads.
        Really? The threads on my 88 were fine. Anyway, if it's not one it's the other. Just a minor set back- happened to me too. CarQuest had it available for me, 1 day out. Good luck

        Comment


        • #5
          yup 88-89 is different
          -Greg
          Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
          BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
          Redneck Engineer
          FOTY - '09
          5x Festiva Madness Attendee...FM 3,4,5,6,8
          http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
          http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

          Comment

          Working...
          X