Announcement

Collapse
No announcement yet.

Stranded... What fun...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Stranded... What fun...

    Originally posted by crazyrog17 View Post
    Fusible links are under the hood on the driver's side shock tower. They split the power from the battery into three circuits, one of which is engine control.
    Those fusible links can be replaced with PAL cartridge fuses, 30a, 40a, 30a left to right respectively. They're much more effective than a bridge wire fuse.
    In love with a MadScientist!:thumbright:
    There's a fine line between breathtaking ingenuity and "That's the stupidest thing I've ever seen!"

    Comment


    • #17
      Originally posted by sickfleming View Post
      That actually popped in my head too. I haven't changed one before but I have heard some stories about their failures on this forum, among other sensors. But I'm a little slow when it comes to which symptoms lead to which sensors, particularly on these pre-1996 cars which aren't scan tool applicable.
      How do you check for a bad cam position sensor exactly?
      I just pull a spark plug & check for spark. Doing this tells you your coil,ignition,cps & spark plug are good.
      If these check out you dont have fuel. If you dont have fuel it be a few differnt fuse's or your VAF connection (wiggle the VAF plug). Check your fuseable link & fuses.
      FYI, when driving 20+ year old vehicles I carry an emergency tool kit. Flashlight,Test light,Multimeter,fuse's/fuseable links,spare bulbs and a couple basic tools (BFH also but not recommended). You can buy all this stuff for a bowl of rice @ Harbor Freight. And will fit in a canvas "Ammo Bag" under your seat.It has saved me a tow truck coule times over the years
      Some people like to read fiction,I prefer to read repair manuals. Weird I know-
      Henry Ford: "Failure is the opportunity to begin again more intelligently"
      Fuseable Link Distribution Block repair link

      Comment


      • #18
        Originally posted by nitrofarm View Post
        I just pull a spark plug & check for spark. Doing this tells you your coil,ignition,cps & spark plug are good.
        If these check out you dont have fuel. If you dont have fuel it be a few differnt fuse's or your VAF connection (wiggle the VAF plug). Check your fuseable link & fuses.
        FYI, when driving 20+ year old vehicles I carry an emergency tool kit. Flashlight,Test light,Multimeter,fuse's/fuseable links,spare bulbs and a couple basic tools (BFH also but not recommended). You can buy all this stuff for a bowl of rice @ Harbor Freight. And will fit in a canvas "Ammo Bag" under your seat.It has saved me a tow truck coule times over the years
        Sage advice! We are no longer of the vehicle owner mentality that can afford to stand beside a dead car and merely look helpless and stupid. I admire anyone that DDs a 20 year old car.

        Comment


        • #19
          Re: Stranded... What fun...

          Originally posted by Bert View Post
          I admire anyone that DDs a 20 year old car.
          These vehicles WILL teach you independence, if you have the desire (or necessity) to repair them. My younger sister is learning about this, and while some of the issues have been repaired professionally, she has learned to diagnose and repair before becoming overly concerned about her situation. I personally dread the day I can no longer work on my own vehicle.
          In love with a MadScientist!:thumbright:
          There's a fine line between breathtaking ingenuity and "That's the stupidest thing I've ever seen!"

          Comment


          • #20
            Originally posted by Bert View Post
            Sage advice! We are no longer of the vehicle owner mentality that can afford to stand beside a dead car and merely look helpless and stupid. I admire anyone that DDs a 20 year old car.
            Thank You Bert,it can be trying at times.But the end result is usually well worth it.

            Originally posted by DriverOne View Post
            These vehicles WILL teach you independence, if you have the desire (or necessity) to repair them. My younger sister is learning about this, and while some of the issues have been repaired professionally, she has learned to diagnose and repair before becoming overly concerned about her situation. I personally dread the day I can no longer work on my own vehicle.
            Exactly! This is what I've been trying to convey to my College kids (Son & Daughter). They've gotten a lot better.In the past they would get frustrated & want to sell his they're cars. They've gotten wiser & more patient about break downs.
            Some people like to read fiction,I prefer to read repair manuals. Weird I know-
            Henry Ford: "Failure is the opportunity to begin again more intelligently"
            Fuseable Link Distribution Block repair link

            Comment


            • #21
              If a festiva EVER won't start unexpectedly, or dies unexpectedly, and it still has fusible links, CHECK THE FUSIBLE LINKS!


              Http://www.Youtube.com/TheresGabe

              1991 Festiva L Red: Daily Driver
              1990 Festiva L White: R.I.P.
              1988 Festiva L Silver: R.I.P.
              1991 Festiva L Red B6T: R.I.P.
              1989 Festiva L White: R.I.P.
              1995 Aspire 2-door White: R.I.P.
              1995 Aspire 4-door Red: R.I.P.

              Comment


              • #22
                Originally posted by Bert View Post
                Sage advice! We are no longer of the vehicle owner mentality that can afford to stand beside a dead car and merely look helpless and stupid. I admire anyone that DDs a 20 year old car.
                I DD a 25 year old car :lol:
                Buck.
                -1993 Ford Festiva GL, ~200k, B6, Aspire rear, Rio front, 5-speed. '87 Prelude alloys. Happy to be back on the route!!!
                -1999 Toyota Sienna XLE, 346,000
                -1996 Chevrolet K1500 Z71, 350 V8, 198k, hauler

                Comment


                • #23
                  Originally posted by sickfleming View Post
                  How do you check for a bad cam position sensor exactly?
                  read the sticky a few lines above;

                  Post your Festiva or Aspire repair and maintenance issues. - USE THIS FORUM FOR ANY TECHNICAL RELATED POST (IE. How do I change my oil?, How to remove axle from tranny?, etc)


                  With a squeak coming from the trans end of the engine, I would pull out the distributor and make it turns freely, and that the drive tang hasn't bent or sheared. I had one act exactly like yours. The distributor bushings tried to sieze the shaft, bent the drive tang. It still had spark, but now at the wrong time. Cranked fast like a broken belt, too.
                  Jim DeAngelis

                  kittens give Morbo gas!!



                  Bright Blue 93 GL (1.6 8v, 5spd) (Hula-Baloo)
                  Performance Red 94 Aspire SE (Stimpson)

                  Comment


                  • #24
                    Originally posted by nitrofarm View Post
                    FYI, when driving 20+ year old vehicles I carry an emergency tool kit. Flashlight,Test light,Multimeter,fuse's/fuseable links,spare bulbs and a couple basic tools (BFH also but not recommended). You can buy all this stuff for a bowl of rice @ Harbor Freight. And will fit in a canvas "Ammo Bag" under your seat.It has saved me a tow truck coule times over the years
                    I definitely agree. I always carry my tool bag, sledgehammer, pry bar, jack and Jack stands with me, plus lots of lube. I hate those scissor Jack death sentences.
                    - 1996 Ford Ranger 2.3L 141,240 mi (Traded...wish I hadn't)
                    - 1996 Ford Probe SE 2.0L Auto 126,000 mi
                    - 1988 Festiva "Hermes" 1.3L Carb. 4-spd. 167,000 mi (Found a new home)
                    - 1994 Escort GT, 5-spd. with Pacesetter header, and exhaust kit 101,412mi (RIP...T-boned by ditzy driver)
                    - 2002 Hyundai Accent 1.5L Auto 164,000mi (Wow...so this is air conditioning...)
                    - 1991 Festiva, 1.3L 5-spd. 75,802 miles. Goes by "Trixie"


                    Comment


                    • #25
                      Originally posted by FB71 View Post
                      read the sticky a few lines above;

                      Post your Festiva or Aspire repair and maintenance issues. - USE THIS FORUM FOR ANY TECHNICAL RELATED POST (IE. How do I change my oil?, How to remove axle from tranny?, etc)


                      With a squeak coming from the trans end of the engine, I would pull out the distributor and make it turns freely, and that the drive tang hasn't bent or sheared. I had one act exactly like yours. The distributor bushings tried to sieze the shaft, bent the drive tang. It still had spark, but now at the wrong time. Cranked fast like a broken belt, too.
                      Is the drive tang on the cam? If it's sheared, I hope that doesn't mean cam replacement or anything...
                      - 1996 Ford Ranger 2.3L 141,240 mi (Traded...wish I hadn't)
                      - 1996 Ford Probe SE 2.0L Auto 126,000 mi
                      - 1988 Festiva "Hermes" 1.3L Carb. 4-spd. 167,000 mi (Found a new home)
                      - 1994 Escort GT, 5-spd. with Pacesetter header, and exhaust kit 101,412mi (RIP...T-boned by ditzy driver)
                      - 2002 Hyundai Accent 1.5L Auto 164,000mi (Wow...so this is air conditioning...)
                      - 1991 Festiva, 1.3L 5-spd. 75,802 miles. Goes by "Trixie"


                      Comment


                      • #26
                        Originally posted by sickfleming View Post
                        Is the drive tang on the cam? If it's sheared, I hope that doesn't mean cam replacement or anything...
                        Its on the DIZZY. Maybe its the just the pin that sheared. I figured you had this thing running ,what have you determined so far?
                        Last edited by nitrofarm; 01-31-2013, 07:28 PM.
                        Some people like to read fiction,I prefer to read repair manuals. Weird I know-
                        Henry Ford: "Failure is the opportunity to begin again more intelligently"
                        Fuseable Link Distribution Block repair link

                        Comment


                        • #27
                          Originally posted by nitrofarm View Post
                          Its on the DIZZY. Maybe its the just the pin that sheared. I figured you had this thing running ,what have you determined so far?
                          Well we just finally got my car back from the bank where it was parked via tow truck, which took a good while along with errands I had to run, so I really didn't get much time to give the car the full colonoscopy lol. I did try to turn the engine over, in regards to the ignition control module a couple of you mentioned, but well... Same as before. No start.

                          I'm going to take a look tomorrow...or well, today after I get some sleep. So I'm going to check my fusible links and take a look at my distributor, along with looking at my timing belt and checking my fuel pump and spark. Just out of curiosity, is there any way to check for fuel pressure without a gauge?
                          - 1996 Ford Ranger 2.3L 141,240 mi (Traded...wish I hadn't)
                          - 1996 Ford Probe SE 2.0L Auto 126,000 mi
                          - 1988 Festiva "Hermes" 1.3L Carb. 4-spd. 167,000 mi (Found a new home)
                          - 1994 Escort GT, 5-spd. with Pacesetter header, and exhaust kit 101,412mi (RIP...T-boned by ditzy driver)
                          - 2002 Hyundai Accent 1.5L Auto 164,000mi (Wow...so this is air conditioning...)
                          - 1991 Festiva, 1.3L 5-spd. 75,802 miles. Goes by "Trixie"


                          Comment


                          • #28
                            Originally posted by 200KGPGTP View Post
                            I DD a 25 year old car :lol:
                            During the non salt months (over the past 8 years) I DD an 86 F150 that I've owned since 88. No electronics at all and problems are easy to diagnose and fix and the very reason why I've taken good care of it right from day 1. Previous to that I had a purchased-new 85 EFI Ranger that was nothing but electrical unreliability and grief right from the start.

                            Comment


                            • #29
                              Originally posted by sickfleming View Post
                              Well we just finally got my car back from the bank where it was parked via tow truck, which took a good while along with errands I had to run, so I really didn't get much time to give the car the full colonoscopy lol. I did try to turn the engine over, in regards to the ignition control module a couple of you mentioned, but well... Same as before. No start.

                              I'm going to take a look tomorrow...or well, today after I get some sleep. So I'm going to check my fusible links and take a look at my distributor, along with looking at my timing belt and checking my fuel pump and spark. Just out of curiosity, is there any way to check for fuel pressure without a gauge?
                              So Sick your saying when you cranked it you had NO spark at the plug,and that's why you re moving on to look for fuel pressure? Just trying to clarify Boss.....
                              Some people like to read fiction,I prefer to read repair manuals. Weird I know-
                              Henry Ford: "Failure is the opportunity to begin again more intelligently"
                              Fuseable Link Distribution Block repair link

                              Comment


                              • #30
                                If you jump the fuel pump tester you can hear the fuel in the rail. That's enough pressure to make it run.

                                Comment

                                Working...
                                X