Where to get replacement grommet/bushings for manual Festiva cross member

[Pertwee454]

Need a source for the rubber grommets in the cross member. 1989 manual carbed.

[eurotiva]

Noone has found a good source of these, since it was a part that wasn't supposed to wear as often. But thru the years of oil leaks, road grime, etc, they do deteriorate. Hopefully someone here has a set they are willing to part with. I'll look in my extra stuff

[Bert]

I think I know what you're talking about. It's been awhile since I dropped a crossmember. Can these be faked with a hole saw using old tires or some such?

[eurotiva]

possibly LCA/sway bar grommets cut? They have a slot type shape

[Pertwee454]

I thought that would be the case, thanks for the ideas.

[eurotiva]

How many do you need?

[Pertwee454]

4 of them

[sketchman]

Could either of these help?

http://www.energysuspensionparts.com/proddetail.asp?prod=4106

http://www.energysuspensionparts.com/proddetail.asp?prod=5.4110

[eurotiva]

I went and tried to get some off of one of my parts cars, but they were torn pretty bad