81 escort carburetor for 89 festiva help.

[Brock 89 festiva]

Well I just joined this forum a few months ago got allot of valuable information. But Im having a problem with my 89 stock Festiva. Decided to do the escort Carb swap with an adaptor from rocketman. But I don't know how to hook up the wires on the carb to my engine haha I got the vacuum lines down but not the electrical wires. Anybody done this swap before and can help?

[bravekozak]

Electrical wires? Are you talking about the single wire that goes to the electric choke? Just connect it to a circuit that is hot in run.

[Brock 89 festiva]

its not the choke its a orange and green wire?
NCM_0028.jpgNCM_0028.jpg

[bravekozak]

What is the Holley carb model number stamped on the airhorn?

[Brock 89 festiva]

its a holley-weber 740

[bravekozak]

It does not look like a 740.

[Brock 89 festiva]

are you talking about the numbers stamped on the base of the carb?

[Brock 89 festiva]

is does have the number 7 stamped all over it.

[Brock 89 festiva]

ok it looks like a holley 6520

[bravekozak]

Like this? for Chrysler 2.2

[Brock 89 festiva]

yes perfect

[Brock 89 festiva]

actually it looks like this one. sorry http://www.ebay.com/itm/ROS-HOLLEY-2...10156711&rt=nc

[Brock 89 festiva]

exactly like this one. http://www.ebay.com/itm/ROS-HOLLEY-2...10156711&rt=nc

[Brock 89 festiva]

exactly like this one. http://www.ebay.com/itm/ROS-HOLLEY-2...10156711&rt=nc

[bravekozak]

I hate to say it, but the minute I laid eyes on it, it looked like a computer controlled fuel injector. No computer, no controlled fuel pulses.