1st and 2nd Gen B6 Injector difference?

[TorqueEffect]

I can't seem to find this information anywhere. I can find info on the B3 Fuel Injectors, but not the 1st and 2nd generation B6 Injectors.

I noticed while poking around a build thread, that the 2nd gen B6s use brown fuel injectors, while the first generation B6 that is in my Festy has green injectors.
If there is a difference between these injectors, then the 1st gen B6 could possibly not be running optimally on the 2nd gen B6 ECU/VAF because of the different injectors.

So does anyone know if there is any difference at all between the Green and Brown fuel injectors?

[Movin]

Somewhere we have an injector thread with a bit of discussion about color of injectors. It includes a chart like this but with more info. Also a lot of injector shops post cc by part number molded on the injector, they have huge nice charts if you have a number.


15lbs = Gray top injectors

19lbs = Yellow top injectors

19lbs = Solid Orange "skinny" injectors

21lbs = Solid Light Purple "skinny" injectors

22lbs = Violet top injectors

22.5lbs = Blue & Black top w/ Silver body injectors

24lbs = Sky Blue top injectors

25lbs = Solid Black "skinny" injectors

25lbs = Solid Light Blue "skinny" injectors - Navigator

27lbs = Solid Light Gray "skinny" injectors

30lbs = Red top injectors

36lbs = Brown top injectors - low impedence, used in the 4 cyl Turbo vehicles

36lbs = Dark Blue (Colbalt Blue) top injectors

36lbs = Solid White "skinny" w/ rectangular connector injectors

39lbs = Solid Blue "skinny" injectors - Blue Giant....Ford rates this at 39lbs, flow rate is actually 42lbs

42lbs = Lime Green top injectors

42lbs = Solid Green "skinny" injectors

48lbs = Beige top injectors - found on 85 CFI 5.0's

50lbs = Gray top injectors

55lbs = Black w/ Gray top injectors

65lbs = Purple top injectors

160lbs (1600cc) = White top injectors w/ black body

http://www.fordfestiva.com/forums/showthread.php?19228-Fuel-injector-Flow-charts