pully help

[puncho]

i put a 94 aspire engine in a 89 festiva. pullys wont innerchange so i used the aspire pullys that was on the engine. can some tell me if i can get a ac. clutch to put on my compressor that will match the aspire pullys..

[bravekozak]

Sanden (dealer installed) compressors have both A/C compressor pulleys (V-belt and multirib) available.
What make is your compressor?

[puncho]

that i dont know.where do i look on the compressor to see what kind it is. but i think it is dealer installed.

[puncho]

It has NIPPONDENSO on the compressor clutch

[bravekozak]

I also have a Nippondenso (factory) compressor. I changed all of my pulleys to V-belt single groove. Is your compressor pulley multirib?

[puncho]

no the engine pulleys are multirib the compressor im trying to use is v belt single groove. do they make a multirib pully for the compressor we have.

[bravekozak]

I have never seen one. If not, just change the outer pulley for the crankshaft and the idler pulley.

[puncho]

thats what id like to do but i cant find an outter v pulley that will fit the crank shaft on the aspire engine its bigger than the festiva crank shaft

[william]

Late 92 and 93 festiva have the ac pully your looking for.

[puncho]

I'll look for one of them thank.