Announcement

Collapse
No announcement yet.

Rear Hatch

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rear Hatch

    My hatch is pretty rusty and has a wiper (motor is broke but that's a different story. I have access to a non-wiper hatch.
    My question is.... can a non-wiper hatch be made to accept the wiper assembly
    I have yet to put the panels apart to see for myself.
    Whoa, that was fun!

  • #2
    Yeah should have the same set up besides the hole for the wiper. Drill a hole through it & hook everything up. People have used the wiper set up on non wiper hatches
    Last edited by Ninjawimp; 04-21-2015, 04:54 PM.
    sigpic Hold up, I'm headed to the moon cus the world is screwed up

    Comment


    • #3
      I installed one in mine, remember 8 inches not 7!
      91 Festiva L "Erika" b3t swap on the way
      06 Jeep Cherokee Overland
      95 Aspire (sold)

      Comment


      • #4
        Originally posted by ottoparts View Post
        My hatch is pretty rusty and has a wiper (motor is broke but that's a different story. I have access to a non-wiper hatch.
        My question is.... can a non-wiper hatch be made to accept the wiper assembly
        I have yet to put the panels apart to see for myself.
        Yes, all of the wiring is there. Not sure about the squirt tube hose, but the wiring is in place. I have one to do the switch over on myself.

        Comment

        Working...
        X