Wires connected to ignition switch

[Cory_Thurmond]

I have 2 wires mounted to my ignition switch on both my 88 and 91 festiva

They have no plug
One is green one is red

I cannot get the steering column separated from harness with out removing these.

Well i ripped the soder off of my nicer steering column connected to my efi harness

So i took the plastic box apart to see what to re soder and its just 2 copper progs that are spring loaded where they are always touching.

So my question is can i just wire the green and red wires togetherl or do i need to resoder them to the progs and put back under the column ?



Sent from my LG-H631 using Tapatalk

[jawja jim]

If the 2 wires are green and red/white stripe connected to the plastic box, they are for the "key left in " warning.

[Cory_Thurmond]

So i dont need them connected ? Or do i need them sodered back into plastic box. Or leave em and cap them ?

Sent from my LG-H631 using Tapatalk

[jawja jim]

That switch is normally open, so they can be capped, if you don't want the "reminder". I don't know how repairable it is anyhow.

[Cory_Thurmond]

Sweet

Sent from my LG-H631 using Tapatalk