Announcement

Collapse
No announcement yet.

HELP! Control Arm Bolt

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by FestYboy View Post
    A swivel socket on a breaker bar would do that.

    But you work with what you got.
    I don't have any swivel sockets but I do have universal adapters. That probably would work too I guess.
    Now that you mention it, I think I probably used one of them for this problem before.
    Brains are precious.. try to hang on to them as long as you can

    We started out doing a clutch pressure plate replacement but ending up replacing that in addition to the rear main seal, the flywheel, the oil pan gasket, the control arms, the left cv alxe, new engine oil, and new trans fluid... finished about 6:30 tonight. Sams 91 is back on the road and driving much better now. Theo taught me a few things and I taught him a few. Theo asked me all kinds of thing about his B6 Turbo swap but I wasn't much help to him in that area. I told him he should start a thread about his and seek out the experts in that area.
    Last edited by 1990new; 03-08-2017, 09:58 PM.

    Comment

    Working...
    X