Tweet
Ok so I am in need of piston rings for 1 piston since I broke a ring. And I am in a hurry and no one has them what other motors can I get one from?
Sent from my SAMSUNG-SM-G891A using Tapatalk
Sent from my SAMSUNG-SM-G891A using Tapatalk
-
-
What engine? B3?
Sent from my SM-G920W8 using Tapatalk -
Yes
Sent from my SAMSUNG-SM-G891A using TapatalkComment
-
Should be able to order them through Advance Auto and get them in a few days. Other than that, I'm not aware of any bike engines that have a piston diameter that is even close to a B3.Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
What size ring are you needing? I do not know about your area but some places have open stock rings, meaning they have rings sorted by bore,ring type, ring witdh and they assemble ring sets from open stock. I used to use charlie williams import center when I needed a ring or set in a hurry that no one had. You will need to know your bore diameter and ring width30 + Vehicle projects right now.7 Festiva/Mazda 10 GM IDK how many others,hope that helps explain all the stupid questions/shortcuts/interchanges etc. trying to liquidate so I concentrate on the good ones. Goal finish 1 amonth using as much stuff as I already have accumulated.Comment
-
It's a straight up stock festiva motor and the middle ring
Sent from my SAMSUNG-SM-G891A using TapatalkComment
-
And I'm not paying $120 just for 1 ring that I need.Originally posted by FestYboy View Post
Sent from my SAMSUNG-SM-G891A using TapatalkComment
-
Check charlie williams import center in mission kansas and see if they still sell single rings from open stock.30 + Vehicle projects right now.7 Festiva/Mazda 10 GM IDK how many others,hope that helps explain all the stupid questions/shortcuts/interchanges etc. trying to liquidate so I concentrate on the good ones. Goal finish 1 amonth using as much stuff as I already have accumulated.Comment
-
Got new piston rings but the 2nd ring has a lip does that go up or down
Sent from my SAMSUNG-SM-G891A using TapatalkComment
-
2nd ring
Sent from my SAMSUNG-SM-G891A using TapatalkComment
-
Step cut goes downOriginally posted by Cdk2588 View Post2nd ring
Sent from my SAMSUNG-SM-G891A using Tapatalk30 + Vehicle projects right now.7 Festiva/Mazda 10 GM IDK how many others,hope that helps explain all the stupid questions/shortcuts/interchanges etc. trying to liquidate so I concentrate on the good ones. Goal finish 1 amonth using as much stuff as I already have accumulated.Comment
-
Comment
Comment