Announcement

Collapse
No announcement yet.

Engine mounts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Engine mounts

    Hi
    my car is a 1992 Festiva Automatic

    IS it a hard job to change an engine mount??
    The one closer to the fire wall on the driver side?

    and where can i get these?

    No parts store in canada has them

    thanks

  • #2
    69 Shelby GT-350, 351W, 4 spd
    97 Jag xk8 vert
    06 Mini Cooper S GP
    93 Stiva
    04 Volvo S80

    Comment


    • #3
      Its pretty simple to do, just support the engine so it doesn't fall when yu take the mount off.
      Brian
      http://www.cardomain.com/ride/2274977



      93 GL modyfied!!!
      :fish:

      Comment


      • #4
        ok,
        too remove it alot of stuff I have to loosen???

        I dont really know what I am doing sorry guys...

        Comment


        • #5
          I know this is a standard response, but you really need a manual.. If not a Helm at least a Haynes.. The Haynes are pretty inexpensive at the local parts house.. It will have the procedures that you need. The rear trans mount is the hardest one to replace just because it's a pain to get to..

          Comment


          • #6
            Canadian Tire carries Haynes manauls. If not in stock will order.
            I think they cost about $25 CDN now.
            Original owner of silver grey carburetted 1989 Festiva. 105k km as of June 2006. 140k km as of June 2021.

            Comment

            Working...
            X