positive parking lamps wire

[stefan]

I need to find the wire to turn on the parking lamps in the cab. the miserable haynes manual dosent show anything about the parking lamps on the diagram.

[F3BZ]

hope this helps but i never saw a festy with parking lights in the cab.

[stefan]

oops, i worded that wrong. i meant the positive wire inside the cab that is used to turn on the exterior parking lamps. (the two corner lights beside the headlights, and the rear running lights.. the set of lights that turn on when you turn the light switch one click)

i need to find this wire because i want to hook up the parking light flash to my keyless entry.

[F3BZ]

according to this diagram (from a 92 book) splice into the R/Y wire just before the headlight switch, run that wire through the keyless entry switch that closes and goes to ground, the parking lights should lite. the key to remember is that there is always power into the parking lamp relay coil and once that power is allowed to continue onto ground by way of closing a switch, the coil will close the switch in the relay and 12V will go through the 15A tail fuse, to the parking lamp bulbs, and to ground. i don't know how your keyless entry is set up but i hope the pic and explanation helps.