Announcement

Collapse
No announcement yet.

aspire drum brakes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    ok i just looked in my manual again and i feel like a retard. now i see that both bearings are in the drum, i was thinking id have to remove the spindle for the inner bearing for some reason, ok. did i mention i feel like a retard.
    2007 Ford Taurus 23-25MPG
    1976 Chevy Silverado (my toy)
    1951 Ford Deluxe, being rebuilt


    Have an old car truck or tractor? Go here.
    http://www.aintperfect.com/

    Comment


    • #17
      The only problem i've had and never able to figure out is how to adjust the brakes. I have been setting the auto adjusters the same on both sides and hoping that adjust correctly. Then I have to mess with the emergency brake.. what a pain. I've tried backing up and slamming on the brakes and that didn't help either.. although the wife got the escapes to set right.
      91 rusty Festiva 260k

      Comment


      • #18
        Arent you supposed to reverse while you have the handbrake on? I know an old colt i had did this. just pull the handbrake on hard then slowly accelerate in reverse so that the car raises up at the rear slightly rotating on the axel.

        Comment

        Working...
        X