Tweet
where on the fuel rail can you insert a fuel pressure tester? i have a sneeking suspition that i have low pressure in my g/fs aspire and the factory manuals don't list a diag procedure, or location to test.
any ideas?
any ideas?
-
Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
-
Follow the line from the filter to the fuel rail. That's the high side.
The other line is the low side.www.dantheoilman.com
AMSOIL dealer and window tinter.
Trust me folks, you need www.auto-rx.com
Go ahead and ask me why -
what i was actually asking was: Is there a shrader valve that i can tap into for testing like there is on 90% of the FI cars out there or is there a special procedure/tools needed to test.
found my answer while at work: Just like darkdan said "t" into the high side... now all i need is a gauge that can read that pressure.
thanks for the reply...Trees aren't kind to me...
currently: 2 88Ls (Scrappy and Jersey), 88LX, 90L(Pepe), 91L, 91GL (Skippy) 93 GL Sport (the Mighty Favakk), 94 (Bruce) & 95 Aspire SEs, 97 Aspire (The Joker),
94 Justy 4WD, 87 Fiero GT, plus 2 parts cars. That's my fleet.
Comment
-
Glad I could help.
Luckily the guage I bought at NAPA had some fittings and some extra hose in it. I think I had to buy one barbed fitting though IIRC.www.dantheoilman.com
AMSOIL dealer and window tinter.
Trust me folks, you need www.auto-rx.com
Go ahead and ask me whyComment
Comment