Ignition Problem

[Shiva]

I detest working on foreign car locks, usually have to drill some hardened roll pins to remove to disassemble and rekey, but luckily this one is a self contained unit.. there are 2 shear head bolts that as you mount and tighten, they break off- thats the hard part getting the lock out, especially if someone has put locktite on those bolts as they are supposed to.

[Shiva]

took me about 20 minutes to get the switch out-stripping a 92 in fact..
to get the switch APART is some work..and not recommended.
small parts can fly and get lost quickly..