Bp swap road race festiva build.

[chiquito1228]

Selling my foxbody track car, going to track prep my 93 Festiva. Already ordered an oil cooler, would a honda civic radiator work? I found an all aluminum civic radiator on ebay cheap, Im thinking i can get it to fit and find some rubber hoses to make it work. What did you do for a radiator?

Am just using an automatic Festiva radiator with a spark fan and custom shroud

[chiquito1228]

Selling my foxbody track car, going to track prep my 93 Festiva. Already ordered an oil cooler, would a honda civic radiator work? I found an all aluminum civic radiator on ebay cheap, Im thinking i can get it to fit and find some rubber hoses to make it work. What did you do for a radiator?

Am just using an automatic Festiva radiator with a spal fan and custom shroud

[chiquito1228]

Finally when to the Dyno to get some number. Had a small ignition break up at the top end can't notice on the road but the Dyno was picking it up. Dyno at 150 hp and 140 ft tq

https://youtube.com/shorts/4ME6XUAf9N0?si=a9_F4oDn-gIFom4s

[chiquito1228]

With the season almost coming to an end. I might have one more event mid October but we will see how the weather holds up. For now I want to try another exhaust manifold. Currently have a tri y setup. Will be making a 4-1. Retune if needed and back to the Dyno see if it makes a difference. I have order this kit hopefully it's here soon.

0

[chiquito1228]

With the season almost coming to an end. I might have one more event mid October but we will see how the weather holds up. For now I want to try another exhaust manifold. Currently have a tri y setup. Will be making a 4-1. Retune if needed and back to the Dyno see if it makes a difference. I have order this kit hopefully it's here soon.

0

[EscortSportage]

Im still on a B3 thinking about ordering the long tube header off the festiva store. I just wired up my MSD digital 6AL ignition box, made a custom airbox around the cone filter, plan on going MS2 soon and junking the vane air meter. I also ordered a Civic c pillar brace im going to make fit, Have ebay jdm fender flares coming in, and a bunch of parts from the festiva store I still need to install,

[EscortSportage]

Am just using an automatic Festiva radiator with a spark fan and custom shroud

So I have the civic radiator, its massive (much thicker than the stocker) I prob should have ordered a thinner one but ill make it work. Had a buddy tig an elbow on the lower now I need to find some 1.25 to 1.5 radiator hoses.