pictures of my KIA Pride

[Kiaporsche_]

Well, last year I made a few changes to my car, including wheels 15 ", lower suspension, modified tail and front lights. (december 2007)








at the moment I'm doing a wide body, the idea is to paint it finishing this, until now black is the best option.

bye!

[SIBladerunner]

Looks nice, make sure to post pics when its all done.

[Kiaporsche_]

thanks , of course i will post pics , at this moment I'm working on the car (
I have to rush a little because winter is almost here) , see you!

[Unicornasaurus]

Can you even turn? It looks like those wheels rub up against the fenders if they're pointing anywhere but straight ahead.

[Omgloltokyodrift]

Well, last year I made a few changes to my car, including wheels 15 ", lower suspension, modified tail and front lights.

Hahaha, "few changes." Rockin' a BP.

Just need a Kia Sephia BP valve cover. "It's stock, I swear!"

[Sp33dY]

Phwar .... what kinda suspension setup do you have?

[Kiaporsche_]

custom made, honda civic coilovers.

and it can turn at the moment is a little higher, and thatīs why I'm doing a "wide body".

video!

http://www.youtube.com/watch?v=SuRjtQl839Q

[Kiaporsche_]

Hahaha, "few changes." Rockin' a BP.

Just need a Kia Sephia BP valve cover. "It's stock, I swear!"

jajajajaj it is stock! , btw itīs a B5D (1.5 dohc 16v) not a bp , but i want to do the B5D+T :$

bye!

[packrat427]

What kind of mod did you do to the headlights ?

Do you have a close up of them ?

[Omgloltokyodrift]

jajajajaj it is stock! , btw itīs a B5D (1.5 dohc 16v) not a bp , but i want to do the B5D+T :$

bye!

Ooooooooh cool. I thought all the B5 and B6 DOHC engines had intakes go over the valve cover, but we never got the B5 in the States.

Either way, nice ride!

[Kiaporsche_]

thanks
the cylinder head itīs the same of the B6D, I brought my engine from Japan, was a Familia interplay... btw iīm from Chile.

the headlights are black painted, only in the interior, not the glass (very easy to do, and this mod does not interfere with the normal operation of the light)



bye!

[93_Festiva]

Hi there nice car love the look....

What did you get your rims off......

and what suspension are you using with the civic coilovers....

Cheers Craig....

[Kiaporsche_]

hi!

"What did you get your rims off...... "

change my rims becouse 15" that I have now came out cheaper, and in my town we have more
Tyre variety with 15"... the old ones was 185 60 14 and the new ones are 195 50 15.

"and what suspension are you using with the civic coilovers...."

"stock shocks" modified, Now they are a little bit harder, change the fluid by one more dense.

bye!

[packrat427]

thanks

the headlights are black painted, only in the interior, not the glass (very easy to do, and this mod does not interfere with the normal operation of the light)

bye!

What did you need to do to take the glass off the housing , I tried but not too hard , with no luck .
Thanks

[Kiaporsche_]

you need 20 mins on the oven or maybe a little more, a good knife or a screwdriver to cut the silicone, after that, separates the glass from the base (with the same screwdriver...slowly you donīt want to break the glass...:S) , sanding the area that does not reflect light of the headlight (painted red in the picture), tape all that you donīt want to paint and paint the sanded area with high tš black spray, to get back again the glass with the base must use black silicone (use your fingers for better finish). and thatīs all very easy!!

by the way, the area where you work is only the base, the glass remains unchanged.