Pshop Festiva

[pr0nst4r]

I was thinking of a less for profit and more toward a car fund and whatever I had left over I would either sink into the car or donate to FF.com

[Festiva_tunner]

if its priced right I would be interested in alternate lighting and grill options

[pr0nst4r]

I can get you measurements of the front end with out any lights off the parts car tonight

That would be great. I could use those measurements to draw a life-size on some cardboard and go from there. I started work on it tonight just getting the parts out of the way that needed to and such. I wish I could find the cable to hook the camera up so I could post some pictures and start a different thread about the conversion.

The 9.5 was in the middle of the headlight not the longest edge so the could be some of the difference.

That's what had me boggled shorestiva, I measured in the middle of the grill, but thinking back on it, I think I measured from the apex of the curvature too, just making sure that I had all of the correct measurements, but it seems as though I will have that taken care of and have a mock front piece once Festiva_tunner gets all of the measurements for me

On a side note, I'm considering the idea (Lots of "ifs" here) that if it looks really good and if people like it enough, that I would make these for people for the cost of parts and a donation to the "Help me get a Festiva" fund Think people (or you) would go for it? Give me your ideas or suggestions! (I guess one would call that "a feeler")

[Festiva_tunner]

I like it without the stripes, but that GT-R badge has got to go. Way too ricey IMHO

Edit: If someone has the gumption to do so, could anyone make me a cardboard or paper template of the festiva front without the headlights and grill with the hood line and such?? I should probably just go to a J/Y and do it, but it's tough getting around without a car.

I can get you measurements of the front end with out any lights off the parts car tonight

[shorestiva]

The 9.5 was in the middle of the headlight not the longest edge so the could be some of the difference.

[pr0nst4r]

gtr bage is from a mustang

I assumed so, but I also am of the feeling that GT-R Mustangs, while pretty cool, are a bit ricey.

[pyrothehitman]

gtr bage is from a mustang

[pr0nst4r]

I like it without the stripes, but that GT-R badge has got to go. Way too ricey IMHO

Edit: If someone has the gumption to do so, could anyone make me a cardboard or paper template of the festiva front without the headlights and grill with the hood line and such?? I should probably just go to a J/Y and do it, but it's tough getting around without a car.

[pyrothehitman]

i hope you dont mind i added some flare to the pic.....i tinted the windshield, deepened the red,added a GT badge, and turned the headlights on oh and took the racing stripes off

[pr0nst4r]

Ok.. I have a question on measurements.

Another forum member gave me a measurement of 50 7/8" between the corner lights (turn signals), with my math, that would make the headlight width 10 5/16", but a measurement of 9.5" was posted earlier in this thread, which leaves a gap of 13/16". Are there gaps enough to fill that much space in the front grill?

[eurotiva]

^ ilike that....funny thing is that what got me into festys was a 79 rabbit with a swap and nitrous.

[pr0nst4r]

Ok, this should be the last photoshop that I do on this project unless anyone wants anything in particular. Next time you see this concept, it should either be on Eurotiva's car just for a pic or on my very Festiva.

Here is the fixed pic because I'm picky like that:



Edit: I am literally right now marking the grill I got from Greg (Eurotiva) for what needs to be removed. It looks like I'll be able to retain most of the stock mounting points.

[pyrothehitman]

Yeah nothing but good. And mad props for all the photoshops you've done they are all amazing!

thank you thank you thank you....always here in the shadows if any1 wants more

[pyrothehitman]

looks good....i like the vauxhall/festy mix some photoshop'd in the gallery pic page...same lights almost

[pr0nst4r]

DMS BMW Front Conversion with Clear Corners

I'll let the shoop speak for it'self:



Edit: Just noticed I clipped a little off of the driver's side corner on the inside.. probably gonna fix that.