Announcement

Collapse
No announcement yet.

new and improved zippy, and new parts :)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • new and improved zippy, and new parts :)

    ok first off zippy got lowerd

    before...


    the shock before coilovers


    random shot of the breaks cause they look sexy 8)


    the new shock with coilover spring


    the new look




    the new FMIC i got for free its a bit big but it will look cool....



    Last edited by sasquatch; 08-15-2009, 12:50 AM.


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

  • #2
    What spring rates are you running? What struts?

    Comment


    • #3
      Originally posted by Arnie View Post
      What spring rates are you running? What struts?
      i dont know about rates but im guessing about 250 rear and 320 front... and they are on stock aspire front struts and stock festiva rear struts... and they are kind of bouncy cause the struts are a bit worn out and the springs are a bit stiff for those struts lol.... im planning on getting some kyb ones when i have enough money


      Mike, AKA the sasquatch
      1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

      Comment


      • #4
        do you have pictures of your rear coil over set up? did you reuse the bump stops? im trying to figure out how it all goes together

        Comment


        • #5
          Very nice! that sure is a big FMIC..
          -93' L BP swap/e-series, coilovers, RIO front swap, redrilled festy drums, Miata 14" 7 spokes.
          -88' Mazda 323 SE, work in progress..
          -85' Nissan Sentra 5 spd.

          Comment


          • #6
            If it doesn't fit, you can always make it a RMIC! lol

            Roof Mount InterCooler
            -Caleb
            Originally posted by cracked.com on the M203 w/ M433 HEDP
            So, for about the same price as a fully-loaded 1993 Ford Festiva, you could also wield the power to obliterate a small village in the blink of an eye.

            Comment


            • #7
              ^^thats funny. We set one on top of euro at the meet. Looking nice mike.
              -Greg
              Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
              BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
              Redneck Engineer
              FOTY - '09
              5x Festiva Madness Attendee...FM 3,4,5,6,8
              http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
              http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

              Comment


              • #8
                Wow thats one big intercooler!
                Brian
                http://www.cardomain.com/ride/2274977



                93 GL modyfied!!!
                :fish:

                Comment


                • #9
                  Loooookin good mike!


                  -Scott
                  Aqua 93 L
                  Razor Red 09 F-150 XLT
                  White 06 Ford Escape XLT

                  Comment


                  • #10
                    thanks scott


                    Mike, AKA the sasquatch
                    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                    Comment


                    • #11
                      I really like the "zippy" detail on your car. That is so original. Did you do that yourself? Is it actually painted on or some sort of decal? (Other members may know this answer, but I'm new here, so please overlook my lack of knowledge!)
                      Pat

                      :fred:1993 5 spd "Big Red" - Daily Driver
                      1994 Honda Del Sol DOHC VTEC
                      2004 Mazda 3
                      -----------
                      5 million dogs and cats are euthanized each year in shelters. Have your pets spayed or neutered.

                      The greatness of a nation and its moral progress can be judged by the way its animals are treated. - Mahatma Gandhi

                      Comment


                      • #12
                        ya i think its from the factory or the dealership and it is just a decal over the paint.... im not to sure if i want to keep it when i re-paint the car....


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment


                        • #13
                          whats up with the N on the rear?
                          http://www.cardomain.com/ride/2065064/1
                          Paulbarrera12.com
                          Festiva Visualizer Project

                          Comment


                          • #14
                            ^its to let everyone know that im a "new" driver... in a bit i have to take the next stage of my drivers license to get rid of it... but i kind of like it there cause i took off my "ford" badge and there is two holes in the hatch now but the N covers them up :lol:


                            Mike, AKA the sasquatch
                            1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                            Comment


                            • #15
                              I love that car mike!! Leave the zipper too. How would you like it if someone just took your namesake from you? jk
                              -Greg
                              Euro-bprt...WORLDS FASTEST FESTIVA !!! 11.78@115.9
                              BP, G trans, Megasquirt/ 550cc inj. t3/t3 (tbird) Garrett, REAR TURBO!!!! AND AC!!!!
                              Redneck Engineer
                              FOTY - '09
                              5x Festiva Madness Attendee...FM 3,4,5,6,8
                              http://www.youtube.com/watch?v=LpCZ7...9Pwqw-oe8s2OYQ
                              http://www.youtube.com/watch?v=vU_eX...9Pwqw-oe8s2OYQ

                              Comment

                              Working...
                              X