Project X

[EVOGUN]

Well they are custom, you can buy all the parts from wilwood and make your own kit as well. They are 12 inch rotors 2 piece, 4 piston calipers /SS lines and Carbon/Kevlar pads. They are so big I had to shave the calipers so they would fit!

Head lights custom made wait till you see them with the covers on, makes them crazy looking.

Thanks

[hdfestiva67]

do you even have a kens cover on those lights? thats not very clean when you can see the lip of the headlight mount on the fender like that. lights are cool but you need to complete it and make it look clean.

[EVOGUN]

Head lights custom made wait till you see them with the covers on, makes them crazy looking.

Thanks

Not sure if you read this part.

Thanks :wink:

[seniorsteele]

is it tuned yet?

[IdealSociety]

do you have any good pics of your motor mounts? if i remember right you said you dont have a crossmember and made 2 seperate mounts onto the firewall and forward radiator support... im just curious as to the design because im currently working on doing this with my BP/g25mr because im not happy with how high it sits on the stock piece...

any help would be greatly appreciated by a fellow fabricator willing to try something different :wink:

[project b6t]

i really really didn't feel like reading this whole thing but is that a motor out of a nissan pulsar gti-r 1990??? "

is it running?? VIDEOS!?

[EVOGUN]

Yes, Gti-R power. Video's will come, need to finish all the interior first then it will be on the road for a bit of tuning. Then off the road for body and paint.

Thanks :wink:

[project b6t]

omg i can't wait

[Motoxpress]

Can't wait for the next set of pics

Will

[5.0zone]

EVOGUN,
Any updates? You going to go race that...

| 15th Jan 2006, 22:01
| Well, I have a 1988 Ford Festiva I successfully swapped a V-6 Toyota
| Supra Twin Turbo J motor and converted it to AWD. I run low 8's in the
| quarter mile and I haven't been beat yet. Quick little car."
| here's the link to the site it's on. 3rd or 4th from the bottom post i think.
| http://www.carsurvey.org/viewcomments_review_82743.html

:twisted: :twisted: :twisted:

[xanthinic12]

| 15th Jan 2006, 22:01
| Well, I have a 1988 Ford Festiva I successfully swapped a V-6 Toyota
| Supra Twin Turbo J motor and converted it to AWD. I run low 8's in the
| quarter mile and I haven't been beat yet. Quick little car."
| here's the link to the site it's on. 3rd or 4th from the bottom post i think.
| http://www.carsurvey.org/viewcomments_review_82743.html

:twisted: :twisted: :twisted:

does this guy know that a 2JZTT is a stright six and would probably never fit in a festiva, unless he had a large bank.ha Liar! :laughing6:

[5.0zone]

Actually I was just hoping for an update from EVOGUN.
Looks like it will be one very fast Festiva.
And it sounds like he's building two AWD Festivas, one with a Mitsubishi drive train (I think).
My brother has a '98 Eclipse GSX (turbo & awd), I imagine that would be tough to put in a Festiva, but if you got it in there... LOOK OUT!!!

[EVOGUN]

If I do another it will be mid engine AWD. I would like to get a wreaked evo8 or so and swap that drive train. But have to finish this one first! Been so busy, haven't had extra time to put in the car for body work. So I can paint it. :evil: I should a have a video of it running/1/4 mile end of month. :roll:

Thanks :wink:

[project b6t]

come on man i want to freaking see this car in action.

[pole120]

come on man i want to freaking see this car in action.

That's what i'm saying.....