This weekend I finally got a chance to work on the car. The tranny is back together, and everything is ready to go in. However before I put the motor in, I want to prep the engine compartment, and add some stuff that will be much easier to do with the motor still out. This first shot is of the K&N fuel filter, I cut up the stock bracket and fabbed a mount for the filter to sit in. turned out great!

This next pic is of the front of the car as it stands now. Notice how I removed most of the front bumper mount, even though most of this is not necessary with the smaller Probe GT intercooler I'm using, this will allow the fitment of a very large front mount intercooler later.

This closer pic shows the intercooler mounted from the front.

This last shot is of the Honda Civic radiator, FAL fan, and Probe GT intercooler mounted (actually just tied up in place) where they will be in the car when the motor is in. I wanted to have the mounting squared away before the motor is in place, this is much easier then trying to do it later.

Author: Chris Rummel

Chris's B6T Swap Pg 24 - Chris's B6T Swap Pg 26

Copyright © 2003 Ford Festiva Com- All Rights Reserved

(Except Text and images courtesy of Chris Rummel)