Indy meet in November 2014?

[TominMO]

Charlie, since you're buying the seats, recommend that if you are coming to the meet in a '90 or later Festy, remove the pass. seat first. You can just bolt in the one you are buying from me for the trip home. The driver seat I'm bringing will be in two parts, for easier stowage.

[Charlie1717]

Charlie, since you're buying the seats, recommend that if you are coming to the meet in a '90 or later Festy, remove the pass. seat first. You can just bolt in the one you are buying from me for the trip home. The driver seat I'm bringing will be in two parts, for easier stowage.

Good thought! Not sure if I'll be in a festy or not, depends if I get all the brake work and everything else up to speed. If I don't I'll be in my ranger with plenty of room.

Looking forward to the meet!

[TorqueEffect]

Sweet, looks like I will be able to go.

Funny enough though this is less of a drive for me than Ohiostiva. lol
By a good amount too.

Would like to sell something to offset the price of gas, but I don't really have much to sell.

-Set of Metro Rims, one with a bit of a dent in the lip, but doesn't effect the usability at all. Two of the four have bald tires, the other two are just the rims.
-Orange Speedo Cluster no bulbs (didn't have any when I got it lol)
-White Speedo cluster laying around somewhere
-Set of Map Pockets with screws
-Tattered 90s L driver's seat, and passenger seat in far far better condition. Both seats are missing the plastic glides on the rails.
-Fully working Seatbelt motors and tracks, and a working seatbelt brainbox to go with them if you can remove it from my car. lol Been sitting under my seat still because I can't get the screws mounting it to budge, or maybe I am just not trying hard enough. lol)
-Set of Power Mirrors, missing passenger side interior sail plate.
-80s handbrake console and ashtray
-front washer filler tube
- 2x factory KYB Rear hatch struts
-rear wiper motor, and wiper arm (wiper arm is rusty and needs cleaning up)
-Orange Factory cassette deck
-80s LX steering wheel combo switch assembly with factory Intermittent wiper switch
- Carb ECU
-LX Front Seats in really good shape (Hate to let these go, but I like my Prelude seats more)


Look for any of the below, but only as trade as I am a bit strapped for cash.

Rear 90s speaker plastics in good shape with no cracks.
Any Festiva spoiler aftermarket or factory
90s 323 B6 VAF and ECU (I still need to give back the ones I have been borrowing from Safetyguy)
Stuff for rear-turbo setup

[william]

How much for belt motors and tracks

[TorqueEffect]

$50? I'll see if I can find the lap and shoulder belts for them too.

[muleskinner]

I would go to this, but I am out of vacation days till after November & I can't afford days off without pay.

Have fun!

[TorqueEffect]

Also looking for a good IAC Valve for a 1st Gen B6
And Auto Aspire, or Rio Front brake swap stuff.

$50? I'll see if I can find the lap and shoulder belts for them too.

Too much? How about $40?

[TorqueEffect]

I guess I just want too much. :p

Just shoot me an offer then, worst I can say is no.

------------------------------------------------------------------------------

Also looking for a larger master cylinder. Festy one is a bit too spongy for my liking, and rather than buying a bench bleeding kit, might as well just change the whole thing out for an upgrade.

[william]

Sorry I didn't check back I only need the motor and track.
I don't really need the lap belts.

[Pu241]

Kind of expected to see a few people backout by now.

[TominMO]

Kind of expected to see a few people back out by now.

Shaping up to be a decent little meet....

[Pu241]

Yes, it is!

[TorqueEffect]

Sorry I didn't check back I only need the motor and track.
I don't really need the lap belts.

Alrighty that saves me digging through stuff to find them lol.

I will even hook them up to the plugs on the car just to make sure they still work, since they have been sitting in the garage about a year or so.

[william]

Sounds good.
Any one need a hatch? I have a half black half white.
Very few dents and its just starting to bubble on the him flange.
No glass but can bring one.
Also have a complete silver hatch with one small filler crack.
I need these gone, there hanging on the wall where my kayak is going to spend the winter.
If not there getting scraped.
I can take picks if anyones interested.
10 each. Although I'm not sure how easy bringing 2 will be.

[TorqueEffect]

Metro wheels, and automatic belt motors/tracks are now claimed.

Everything else still available.



If I can find the other ball stud, I have a hood strut someone can have for $15.



I also have a front washer bottle tube with good cap. $5





Ford Probe Steering wheel, fits the Festiva. $5 (One of the two horn buttons don't work because one I had to disconnect because i would blare the horn when the wheel was turned.)





91-93 Rear Seat $15 (Vinyl is separated on one side in the middle but still completely usable for someone who doesn't have a seat.)



90-93 Passenger seat in decent shape, tear in vinyl $15 (rails need new glides)





Grey 88-89 LX Seats $40 Some fabric is come apart on the driver's seat. (See Pic)