Can someone post the different engine codes such a B3, B6, Bp, etc. and explain what they are and what cars they are found in? This is somewhat confusing to say the least. I found a sticky on transmissions, none on engines.
Announcement
Collapse
No announcement yet.
Engine titles
Collapse
X
-
This has been posted before.
All the mazda engines that fit in our car are B series
So
B1 = 1.0 SOHC not sold in USA
B3 = 1.3 SOHC
B6 = 1.6 SOHC
B6T= 1.6 Turbo DOHC
B8 = 1.8 SOHC
BP = 1.8 DOHC
BPT = 1.8 DOHC Turbo variant from Japan
They are all found in a number of cars I will let someone else answer that.
-
The is also an option with the Aussie market the B5.
Available as both 12v sohc, and 16v sohc.
I also beleive there was another (but rare), B3 dohc??
I tried to look for the pictures, to no avail?
There was one owned by an Aussie guy who imported a jap spec 94, and i'm sure it had two cams?Last edited by festymick; 09-03-2008, 10:29 PM.
Comment
-
Originally posted by festymick View PostThe is also an option with the Aussie market the B5.
Available as both 12v sohc, and 16v sohc.
I also beleive there was another (but rare), B3 dohc??
I tried to look for the pictures, to no avail?
There was one owned by an Aussie guy who imported a jap spec 94, and i'm sure it had two cams?The left lane? Are you crazy!!! I never drive in the left lane...It's full of freaks driving the wrong way and charging right at you!!!
Comment
-
So does this sound okay?
B1 = 1.0 SOHC not sold in USA
B3 = 1.3 SOHC
BJ = 1.3 DOHC
B5 = 1.5 SOHC (12V) - Aust.
B5 = 1.5 SOHC (16V) - Aust.
B6 = 1.6 SOHC
B6T= 1.6 Turbo DOHC
B8 = 1.8 SOHC
BP = 1.8 DOHC
BPT = 1.8 DOHC Turbo variant from Japan
Comment
-
GLCs had the 8 valve B5 in them as well. Actually used a timing chain instead of a belt. Except for the pollution control crap on it that was a pretty good engineSearch Master - Honorary Member of Midwest Festiva Inc., Gulf Coast Chapter
Everyone is entitled to be stupid, but some abuse the privilege.
- Unknown
I don't like superstitious people. They're bad luck. - Serge A. Storms
If at first you don't succeed, failure may be your style.
- Quentin Crisp
God, please save me from your followers!
- Bumper Sticker
Comment
-
... and don't forget the 16 valve SOHC 1.6l engineIan
Calgary AB, Canada
93 L B6T: June 2016 FOTM
59 Austin Healey "Bugeye" Sprite
"It's infinitely better to fail with courage than to sit idle with fear...." Chip Gaines (pg 167 of Capital Gaines, Smart Things I Learned Doing Stupid Stuff)
Link to the "Road Trip Starting Points" page of my Econobox Café blog
Comment
-
Originally posted by alpaccino View Posthey i have a b5 DOHC (16V) in my car and its from Japan. And one more thing i notice that no body in this forum use the b5 engine is it that you all don't rate this engine.
1988 323 Station Wagon - KLG4 swapped
1988 323 GT - B6T Powered
2008 Ford Escape - Rollover Survivor
1990 Festiva - First Ever Completed KLZE swap (SOLD)
If no one from the future stops you from doing it, how bad of a decision can it really be?
Comment
-
Originally posted by Mike McKown View PostI don't see the Miata engines listed here. Is there a reason? Different engine family?The Festiva Store
Specializing in restoration, tuning and custom parts.
Comment
Comment