Tweet
What size is the throttle body intake? 2 1/2" or 3". Was looking at installing aftermarket intake tubes on my Tracer b6.
Sent from my LG-LS720 using Tapatalk
Sent from my LG-LS720 using Tapatalk
-
1991 Ford Festiva BP (Full Aspire/Rio Swap) (337k Miles) (Around 95k Engine)
2002 Chevy Cavalier LS Sport 2.2L DOHC Ecotec (Threw a Rod)
1998 Chevy Monte Carlo LS 3.1 V6 (225k miles) Best MPG = 28 -
i doubt its 2.5, thats about 62mm, thats pretty dang big. -
i bet 2 inches is very close,Comment
-
I meant the tube leading up to the throttle body, before the throttle plate.Originally posted by bhearts View Post1991 Ford Festiva BP (Full Aspire/Rio Swap) (337k Miles) (Around 95k Engine)
2002 Chevy Cavalier LS Sport 2.2L DOHC Ecotec (Threw a Rod)
1998 Chevy Monte Carlo LS 3.1 V6 (225k miles) Best MPG = 28Comment
-
A 3 inch intake pipe on a 1.3l motor is total over kill. People use that size on 600hp turbo applications
Sent from my SGH-T989 using TapatalkComment
-
OD of the TB is a hair over 2.5" IIRC. I used a 2.5" silicone coupler, it was a "snug" fit. Don't use the ones that AZ sells b/c they get pretty hard when they are cold. Get real silicone ones from e-bay. This is the one I used:
~Nate
the keeper of a wonderful lil car, Skeeter.
Current cars:
91L "Skeeter" 170k, Aspire brakes, G15, BP, Advancedynamics coil overs, etc. My first love.
1990 Kawasaki Ninja 250 - my gas saver, 60+mpg - 40k
2004 MotoGuzzi Breva - my "longer range" bike - 17k
FOTY 2008 winner!Comment
Comment