Custom signals

[Festiva_tunner]

I installed these recently (had to do some mods to the turn circuit) put in a few relays to control either stock circuit or strobe circuit and had to modify the way the controls get power

[packrat427]

Now that is cool !!

[anomoly40]

What Pack said.

[mr_dude]

well done, cops bother you about it much? i know they would here in CA.

[Festiva_tunner]

I had to pay a 109 dollar fine for having "white flashing lights"

I originally had the strobe in the reverse lens, I've moved it to the amber.

I also have a switch wired into a few dual position relays . . . switch off stock signals, switch on strobe signals. It involved running a new hot wire out to each of the turn signals for the control boxes, I then had to wire in another 2 position relay to send power through the flasher or straight to the controllers, Then to make the dash signals still work I wired each on its own relay, the flasher receives power even when the strobe circuit is energized, the wire that would normally turn the indicator on is now the coil control and the flasher is the source for the switch side, Took some sitting down with photo copys of the OEM schematic and a bottle of white out and some colored pens, many head aches and two revisions and I get a finished product utilizing 5 relays and a lit indicator switch, that is all hidden and looks completely factory ( accept for the indicator on the dash and if you were to pull the guage cluster and see the relays )

[Deathshead]

[festymick]

Now that is cool. I did a similar thing- but run all the lights through a relay box...

[htchbck]

^^^ wow that is cool ... once again with the egg mick, I warned you about that :lol:

[Festiva_tunner]

Nice I like the rotaion effect you did there

[festymick]

Geez! That is a VERY old video!!
My brother is working on a new one which will go from one side to the other.


I would love to put in the strobe lights like Festiva_tunner though.

[Festiva_tunner]

not hard to do I just drilled a 1/2" hole to accept the strobe light(has rubber stopper) and then wired in the control boxes