Announcement

Collapse
No announcement yet.

Brush guard

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    Brush guard

    Hi, I am wondering if any one has installed a brush guard or made a custom bumper for the front?
    Mine front and rear bumpers are rusted out and wanted to make custom so if you hit a deer the body damage will be minimal.
    Any help would be appreciated
    thanks
    Tags: None
  • #2
    i dont think that will look very good but you never know. if i where you go to the junk yard and look around for one off a small jeep or suzuki sidekick or somthing like that and cut and weld it to shorten it or what ever.


    Mike, AKA the sasquatch
    1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

    Comment

    • #3
      Put enough armor on the car and it'll look like a little Road Warrior reject!

      Comment

      • #4
        someone on here has a lime green festiva with bush guard. it looks awesome!
        89SX funtop! Fully loaded!
        RIP 90LX

        Comment

        • #5
          Originally posted by stefan
          someone on here has a lime green festiva with bush guard. it looks awesome!
          yeah i remember seein it at the spring ohiostiva meet, just can't remember who's car it was

          1988 323 Station Wagon - KLG4 swapped
          1988 323 GT - B6T Powered
          2008 Ford Escape - Rollover Survivor

          1990 Festiva - First Ever Completed KLZE swap (SOLD)

          If no one from the future stops you from doing it, how bad of a decision can it really be?

          Comment

          • #6
            This one??

            It's a good thing you don't read the stickies, you might of learned something.Poverty produces creativity

            Comment

            • #7
              YES !!!

              Thanks Kemp , I was just getting ready to look for that
              ------------------------------------------------
              The Trigger - Midwest Festiva Inc., Illinois Chapter
              Smart Passion white with H-D interior
              HD2500 Duramax Chevy
              Harley Davidson Ultra classic ..I am in love !!
              Pro Street S-10 http://www.cardomain.com/ride/2214968
              Diamond white Deville 27,000 mile cream puff
              Z28 LS1 power 500 +
              90 Festy L daily driver wants to be modded, OK
              It is being modded , a little at a time http://www.cardomain.com/ride/2214953


              Join me on Facebook !! ;http://www.facebook.com/profile.php?...00000295094896

              Comment

              • #8
                Thats austyfrosty's car.
                Brian
                http://www.cardomain.com/ride/2274977



                93 GL modyfied!!!
                :fish:

                Comment

                • #9
                  that does look cool, put some lights on one of the bars and then a light rack on the roof then a winch on it to then it would look cool.
                  that would be awesome if there was a big lifted truck stuck in a ditch or something and a festiva pulls it out!!!


                  Mike, AKA the sasquatch
                  1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                  Comment

                  • #10
                    Thats what I was planning, how would you install a roof rack?

                    Comment

                    • #11
                      hahaha that brush guard actually came out very good.

                      Comment

                      • #12
                        i drew one up a little wile ago. all you have to do is drill a copple of holes in the roof for wires and mounting holes.
                        my fab skills are better than my drawing skills lol you can also make runing bords and a rear bumper and a exo skleton to.
                        then it will bee a bush buggy lol. and if you roll over it wont crush the roof. BONUS!!! this is my drawing
                        Private Group Photo & Video Sharing
                        http://s228.photobucket.com/albums/ee217/sasquatch369/?action=view&current=festivadrawing.jpg
                        A private space for your group's photos and videos. Share, react, and relive moments together. Available on iOS, Android, and desktop. Free for new sign-ups.


                        Mike, AKA the sasquatch
                        1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                        Comment

                        • #13
                          it cut a bit off the photo, my name is not asquatch


                          Mike, AKA the sasquatch
                          1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                          Comment

                          • #14
                            i just thought, where abouts are you stevend135 cause i might be able to help with making or installing it if you need any help


                            Mike, AKA the sasquatch
                            1990 LX, bp+T/g25mr, 9psi dynoed at 194HP, turbonetics t3/to4e 57trim, haltech E6X standalone, 550cc injectors, turbosmart wastegate, synapse BOV, walbro 255 fuel pump, aeromotive FPR, AEM wideband, 3 inch exhaust, huge FMIC, 9LB flywheel, 6 puck clutch and way more parts that im forgetting i installed lol...

                            Comment

                            • #15
                              wisconsin

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X